[Clean My House] Cleaning Bath Toys

There are 3 ways you can clean bath toys:

1. Place all toys in a washing bag/net bag and throw in the washing machine and wash on the hottest cycle. Leave to thoroughly dry (you can leave them in the sun but be careful that they do not fade and become brittle)

2. Place all small toys on the top shelf of the dishwasher and larger toys on the bottom and run the dishwasher on the hottest cycle using either a dishwasher tablet or just bi carb and vinegar. The dishwasher will dry for you.

3. Place in a sink filled with hot water and dishwashing liquid and leave to soak for a few hours. Dry thoroughly.

To avoid mould in bath toys:

- make sure toys are drained of water after a bath

- wash toys down with hot water after a bath to remove soap

- drill a larger hole in toys (or a hole if there isn't one at all) to allow water to drain easily

- store in a bag or basket with holes to allow any excess water to drain

- or don't buy bath toys that can grow mould!

No comments

Note: only a member of this blog may post a comment.

Powered by Blogger.